Combined Mounting Creates Matching Array Angles
| Owner: | Joan Bertsch |
| Geographic location: | Bolinas, California |
| System output: | 4.0 kW |
| Configuration: | 40 KC-120s and AEI MM-5000 inverter with 4 Concord batteries |
| How/where mounted: | 28 flush mounted on upper roof; 12 on tilt-up mounts on lower roof |
| Rebate amount: | $10,775 |
| Date of installation: | March 20, 2002 |
| Designer: | Daniel Pellegrini |
| Installer: | Roy Phillips panels on roof; Don Barch inverter and wiring |
| CCEnergy Rep: | Dan Pellegrini, Don Barch |
|
Larger, flush mounted array installed on higher pitched roof section. |
Smaller tilt-up mounted array compensates for flatter roofline and matches angle of flush-mounted array. |
||||
|
Array design accommodates roof obstacles. |
|
